Details

Transfer pump includes one T4 Carbon Steel pump and air/fluid fittings.

The T4 Transfer Pump with ProConnect technology allows you to quickly connect and disconnect the air motor from the pump lower. It combines Graco’s proven Merkur air-motor and popular carbon steel lower. The T4 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required. The T4 pump is rated for a continuous output of 17 lpm (4.5 gpm), allowing enough flow to easily keep up with Graco’s biggest proportioner, the Reactor H-50.

Quick Transfer Between Drums – quickly change to a new drum of material without the mess of dripping chemical by using multiple pump lowers.

Easier to Maneuver – easily transfer the T4 pump between drums by quickly disconnecting the air motor from the lower before transferring. This makes the pump lighter weight and reduces the necessary ceiling height of your rig.

Eliminate Downtime – get up and running quickly when your pump lower requires maintenance by having a spare pump lower that can easily be installed.

Specifications

• Maximum output – continuous: 4.5 gpm (17 lpm)
• Maximum input air pressure: 100 psi (6.8 bar, 0.68 MPa)
• Maximum output fluid pressure: 315 psi (21.7 bar, 2.17 MPa)
• Maximum fluid temperature: 190°F (88°C)
• Weight: 24.5 lb (11 kg)
• Height: 49.8 in (126 cm)