Pumps & Agitators

  1. Graco E1 Transfer Pumps

    The Core E1 transfer pumps are designed to optimize material supply and minimize downtime. Quieter and less expensive to operate than traditional pneumatic pumps.

    • Maximum Output: 4.5 gal (17.0 L)/min
    • Maximum Fluid Pressure: 315 psi (21.7 bar, 2.17 MPa)
    • Motor: Electric

    Shop Graco E1 Transfer Pumps & Replacement Parts

  2. Graco T1 Transfer Pumps

    Rely on Graco transfer pumps for increased output and longer life. Graco T1 pumps maintain performance in any environment, even with higher viscosity materials.

    • Maximum Output: 2.5 gal (9.4 L)/min
    • Maximum Fluid Pressure: 360 psi (25 bar, 2.5 MPa)
    • Ratio: 2:1

    Shop Graco T1 Transfer Pumps & Replacement Parts

  3. Graco T2 Transfer Pumps

    T2 pumps maintain performance in working environments - lower inlet pressure drops with higher viscosity materials in any climatic condition.

    • Maximum Output: 5.0 gal (19.0 L)/min
    • Maximum Fluid Pressure: 405 psi (28 bar, 2.8 MPa)
    • Ratio: 2.25:1

    Shop Graco T2 Transfer Pumps & Replacement Parts

  4. Graco T3 Transfer Pumps

    The T3 Transfer Pump combines Graco’s proven Merkur® air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump, using less air pressure to provide the same fluid pressure.

    • Maximum Output: 4.5 gal (17.0 L)/min
    • Maximum Fluid Pressure: 315 psi (21.7 bar, 2.17 MPa)
    • Ratio: 3:1

    Shop Graco T3 Transfer Pumps & Replacement Parts

  5. Graco T4 Transfer Pumps

    The T4 Transfer Pump with ProConnect technology allows you to quickly connect and disconnect the air motor from the pump lower allowing for easy transfer between drums.

    • Maximum Output: 4.5 gal (17.0 L)/min
    • Maximum Fluid Pressure: 315 psi (21.7 bar, 2.17 MPa)
    • Ratio: 3:1

    Shop Graco T4 Transfer Pumps & Replacement Parts

  6. Graco Twistork Agitators

    Graco's Twistork Helix Mixer is designed with patented, helix-shaped mixing blades. Its gentle mixing action reduces fluid degradation and splashing compared to propeller blades.

    • Maximum Working Pressure: 100 psi (7 bar)
    • Maximum Recommended Agitator Speed: 800 rpm
    • Weight: 17.6 lb (8 kg)

    Shop Graco Twistork Agitators & Replacement Parts

  7. Graco Expanding Blade Agitators

    The standard 1.5 and 2 inch threaded housing makes installation and operation as simple as threading on the agitator and adjusting the speed to the desired rate.

    • Maximum Working Pressure: 100 psi (7 bar)
    • Maximum Recommended Agitator Speed: 500 rpm
    • Weight: 9.6 lb (3.5 kg)

    Shop Graco Expanding Blade Agitators & Replacement Parts